Embedding Process Safety Management in Computerized Maintenance Management System work order design: Sensorless risk analytics and scheduling for ammonia refrigeration
Process safety compliance is typically tracked in a register separate from the work order system; the two diverge, and the gap surfaces only during audits or incidents. This paper reports a computerized maintenance management system (CMMS) in which process safety constraints govern work order design at an ammonia absorption refrigeration unit (39 tonnes of anhydrous ammonia, a Seveso III establishment) in a European food plant. Encoding five mandated intervals as locked, evidence-gated work order attributes eliminated the parallel register and cut administrative overhead by 60%. A sensorless maintenance risk index (MRI) was derived in closed form: its two directions of disagreement with time-based scheduling reduced to a single exposure threshold, with all four assets at the point of instrument disagreement satisfying the derived conditions. Tested against a failure-history-free baseline, the MRI correlated with it in aggregate (τ = 0.558) yet recovered only one of six elevated-risk assets, while misranking the four most critical ones. This indicates that sensor-free analytics depends on the failure-history field itself rather than the index’s composite form. The monthly workload, modeled as variance minimization, was solved accurately, reducing variance by 95.3% with no added resources; however, management’s preferred redistribution is infeasible, with the deferral window, not crew capacity, as the binding constraint, which represents organizational slack. The architecture is transferable to any process safety management-regulated facility, provided its CMMS can block work order closure when evidence is missing.
Afsharnia, F., & Marzban, A. (2019). Karbord-e ruykard-e talfiqi-ye FMEA-ANP dar olaviyyat-bandi-ye risk-e ta’khirat-e enteqal-e mahsul-e nishekar be karkhane [Risk analysis of sugarcane stem transportation operation delays using the FMEA-ANP hybrid approach]. Journal of Agricultural Machinery, 9(2), 455–467. [In Persian]. https://doi.org/10.22067/jam.v9i2.69447
Ahmad, R., & Kamaruddin, S. (2012). An overview of time-based and condition-based maintenance in industrial application. Computers & Industrial Engineering, 63(1), 135–149. https://doi.org/10.1016/j.cie.2012.02.002
American Petroleum Institute. (2016). Risk-based inspection methodology: API recommended practice 581. (3rd edition). American Petroleum Institute.
Barlow, R. E., & Proschan, F. (1965). Mathematical theory of reliability. Hoboken, NJ: Wiley.
Behari, N. (2019). Assessing process safety culture maturity for specialty gas operations: A case study. Process Safety and Environmental Protection, 123, 1–10. https://doi.org/10.1016/j.psep.2018.12.012
Center for Chemical Process Safety. (2007). Guidelines for risk based process safety. Hoboken, NJ: Wiley. https://doi.org/10.1002/9780470925119
Deloose, A., Gysels, G., De Baets, B., & Verwaeren, J. (2023). Combining natural language processing and multidimensional classifiers to predict and correct CMMS metadata. Computers in Industry, 145, 103830. https://doi.org/10.1016/j.compind.2022.103830
Ding, S. H., & Kamaruddin, S. (2015). Maintenance policy optimization—Literature review and directions. The International Journal of Advanced Manufacturing Technology, 76(5–8), 1263–1283. https://doi.org/10.1007/s00170-014-6341-2
Garg, A., & Deshmukh, S. G. (2006). Maintenance management: Literature review and directions. Journal of Quality in Maintenance Engineering, 12(3), 205–238. https://doi.org/10.1108/13552510610685075
Gopalakrishnan, M., Subramaniyan, M., & Skoogh, A. (2022). Data-driven machine criticality assessment – Maintenance decision support for increased productivity. Production Planning & Control, 33(1), 1–19. https://doi.org/10.1080/09537287.2020.1817601
Gorski, E. G., Loures, E. F. R., Santos, E. A. P., Kondo, R. E., & Martins, G. R. D. N. (2022). Towards a smart workflow in CMMS/EAM systems: An approach based on ML and MCDM. Journal of Industrial Information Integration, 26, 100278. https://doi.org/10.1016/j.jii.2021.100278
International Organization for Standardization. (2016). Petroleum, petrochemical and natural gas industries—Collection and exchange of reliability and maintenance data for equipment (ISO Standard No. 14224:2016). 3rd edition. International Organization for Standardization. Accessed October 30, 2026. https://www.iso.org/standard/64076.html
International Organization for Standardization. (2018). Risk management—Guidelines (ISO Standard No. 31000:2018). 2nd edition. International Organization for Standardization. Accessed October 30, 2026. https://www.iso.org/standard/31000
International Organization for Standardization. (2024). Asset management — Vocabulary, overview and principles (ISO Standard No. 55000:2024). 2nd edition. International Organization for Standardization. Accessed October 30, 2026. https://www.iso.org/standard/83053.html
Jaafar, M. N., Rosli, M. I., Nordin, D., & Buhari, J. (2025). Systematic literature review on the risk assessment of ammonia refrigeration systems in the food industry. Journal of Loss Prevention in the Process Industries, 96, 105629. https://doi.org/10.1016/j.jlp.2025.105629
Jain, A., Bhatti, R., & Singh, H. (2014). Total productive maintenance (TPM) implementation practice: A literature review and directions. International Journal of Lean Six Sigma, 5(3), 293–323. https://doi.org/10.1108/IJLSS-06-2013-0032
Jardine, A. K. S., Lin, D., & Banjevic, D. (2006). A review on machinery diagnostics and prognostics implementing condition-based maintenance. Mechanical Systems and Signal Processing, 20(7), 1483–1510. https://doi.org/10.1016/j.ymssp.2005.09.012
Khudhur, D. A., Tuan Abdullah, T. A., & Norazahar, N. (2022). A review of safety issues and risk assessment of industrial ammonia refrigeration system. ACS Chemical Health & Safety, 29(5), 394–404. https://doi.org/10.1021/acs.chas.2c00041
Lakshmi Shankar, R., Singh, C. D., & Singh, R. (2023). Impact of implementation of CMMS for enhancing the performance of manufacturing industries. International Journal of System Assurance Engineering and Management, 14(5), 1599–1620. https://doi.org/10.1007/s13198-021-01480-6
Lee, J., Cameron, I., & Hassall, M. (2019). Improving process safety: What roles for digitalization and Industry 4.0? Process Safety and Environmental Protection, 132, 325–339. https://doi.org/10.1016/j.psep.2019.10.021
Lei, Y., Yang, B., Jiang, X., Jia, F., Li, N., & Nandi, A. K. (2020). Applications of machine learning to machine fault diagnosis: A review and roadmap. Mechanical Systems and Signal Processing, 138, 106587. https://doi.org/10.1016/j.ymssp.2019.106587
Li, L., Lei, B., & Mao, C. (2022). Digital twin in smart manufacturing. Journal of Industrial Information Integration, 26, 100289. https://doi.org/10.1016/j.jii.2021.100289
Lu, Y. (2017). Industry 4.0: A survey on technologies, applications and open research issues. Journal of Industrial Information Integration, 6, 1–10. https://doi.org/10.1016/j.jii.2017.04.005
Najid, N. M., Alaoui-Selsouli, M., & Mohafid, A. (2011). An integrated production and maintenance planning model with time windows and shortage cost. International Journal of Production Research, 49(8), 2265–2283. https://doi.org/10.1080/00207541003620386
Saaty, T. L. (1980). The analytic hierarchy process: Planning, priority setting, resource allocation. New York, NY: McGraw-Hill International Book Company.
Saaty, T. L. (1996). Decision making with dependence and feedback: The analytic network process: the Organization and Prioritization of Complexity. Berkshire, UK: RWS Publications.
Shi, L., Lv, X., He, Y., & He, Z. (2024). Optimising production, maintenance, and quality control for imperfect manufacturing systems considering timely replenishment. International Journal of Production Research, 62(10), 3504–3525. https://doi.org/10.1080/00207543.2023.2241563
Stamatis, D. H. (2003). Failure mode and effect analysis: FMEA from theory to execution (2nd edition). Milwaukee, WI: ASQ Quality Press.
United States Department of Defense. (1980). Procedures for performing a failure mode, effects and criticality analysis (MIL-STD-1629A). United States Department of Defense. Accessed Accessed October 30, 2026. https://extapps.ksc.nasa.gov/Reliability/Documents/milstd1629_FMEA.pdf
Wang, W. (2012). An overview of the recent advances in delay-time-based maintenance modelling. Reliability Engineering & System Safety, 106, 165–178. https://doi.org/10.1016/j.ress.2012.04.004
Yin, R. K. (2018). Case study research and applications (6th edition). Thousand Oaks, CA: SAGE Publications.
Zonta, T., da Costa, C. A., da Rosa Righi, R., de Lima, M. J., da Trindade, E. S., & Li, G. P. (2020). Predictive maintenance in the Industry 4.0: A systematic literature review. Computers & Industrial Engineering, 150, 106889. https://doi.org/10.1016/j.cie.2020.106889
